Swatch card No. SW-3359 · cut November 15, 2026
Sustainability & ComplianceMill spec card
Dhaka Seminar Puts 15–25% Energy Savings on Factory Agenda
High-efficiency machinery and heat recovery can cut wet processing energy use 15–25 percent, industry estimates presented at a November 14 Dhaka textile seminar showed.
- Fiber
- Sustainability & Compliance
- Count
- 2 min read
- Cut
- Weight
- 461 words
Spec notes
- High-efficiency machinery and heat recovery can cut wet processing energy use by 15–25 percent, per industry estimates.
- Seminar ran 3:00–3:40 PM on November 14 at Hall 08, Textile Innovation Expo 2026, Dhaka.
- Khaled Faisal, Executive Director (Textile), NAZ Bangladesh Ltd., delivered the keynote.
- Rooftop solar is expanding across Bangladeshi industrial zones to cut grid dependency and meet buyer decarbonization targets.
- Panel covered low-temperature chemical processing, digital power management and rooftop solar integration.

High-efficiency machinery and heat recovery systems can cut energy use in textile wet processing by 15 to 25 percent, according to industry estimates presented at a technical seminar in Dhaka on November 14.
The 40-minute session, titled "Green Tech & Energy-Efficient Production," ran from 3:00 PM to 3:40 PM at Hall 08 of the Textile Innovation Expo 2026 Expo Village. Manufacturing leaders, energy specialists and technology providers attended. The seminar closed with Engr. Md. Enayet Hossain, President of ITET, handing mementos to the speakers.
Why does energy efficiency dominate the cost agenda?
Energy consumption and utility pricing remain central concerns for Bangladeshi textile and apparel manufacturers. Industrial experts at the session said the performance of boilers, motors, compressed-air systems and wet processing equipment directly drives production costs and resource use. As energy bills keep squeezing factory margins, green technologies and renewables now offer a route to long-term competitiveness rather than a compliance expense.
Rooftop solar installations are gaining momentum across industrial zones. Factories want lower grid dependency and need to meet global buyers' decarbonization targets, the session heard.
What did the keynote recommend?
Khaled Faisal, Executive Director (Textile) at NAZ Bangladesh Ltd., delivered the keynote. He outlined practical strategies for setting energy baselines and evaluating post-installation performance through operational evidence. His message: measure first, then verify that a delivered system actually performs as promised on the factory floor.
Speakers stressed that every green technology investment must be judged against four tests before purchase:
- Actual factory demand
- Technical compatibility with existing equipment
- In-house maintenance capability
- Expected operating performance under real conditions
Reliable energy measurement and digital monitoring are essential, panelists said, because they identify losses, rank improvement priorities and confirm whether a proposed solution delivers the intended benefit.
Who sat on the panel?
Mehedi Imran Galib, Chief Executive Officer of Hunan High Sky Chemical Co., Ltd., moderated the discussion. The panelists were:
- Rashidul Islam Russel, Managing Director, Aux & Hue Pvt. Limited
- Md. Aminul Islam, Country Manager for the Transfar and Tanatex brands, Transfar Chemical (Bangladesh) Co., Ltd.
- Engr. Naznin Akhter, Director-Business Development, Solaric Group
The panel covered low-temperature chemical processing, digital power management and commercial rooftop solar integration. Panelists argued that linking resource efficiency to production reliability — not treating it as a standalone sustainability metric — creates measurable business value for textile manufacturers.
Participants added that structured technical assessments help factory owners avoid underperforming investments and reach faster payback on clean technology adoption, a point aimed squarely at owners weighing capital outlay against uncertain returns.
The seminar's framing signals where Bangladeshi supply-chain conversations are heading: with buyers tightening decarbonization requirements and utility costs still volatile, expect energy baselining and verified post-installation measurement to become standard steps in factory upgrade procurement.
via textiletoday.com.bd (Source)
More from Marcus Bennett
Show full bio
Senior reporter covering money, funding and market shifts around fashion industry as a trade and business at The Fabric Brief.
308 articles
Also on the board
- Energy Crunch Squeezes Bangladesh Garment Sector, Time Reports
- Bangladesh textile expo maps sourcing pressure from ESPR
- Bangladesh Apparel Sector Eyes FY2026-27 Budget With Concrete Asks
- Solidaridad's BMI Program Delivers 17-Month Payback for Bangladesh Mills
- Bangladesh dyehouses urged to cut 250–300L water use per kg