The Fabric Brief

Swatch bookTuesday, November 17, 2026

Mills, fibers and the garment trade — cut daily

Swatch card No. SW-6037 · cut November 15, 2026

Apparel ManufacturingMill spec card

Engineers Tell Dhaka Seminar: Lean Tools, Not Capacity, Fix RMG Margins

Industrial engineers at Dhaka's Textile Innovation Expo 2026 said bottlenecks, WIP buildup and rework erase capacity gains, urging lean tools and real-time OEE tracking.

Fiber
Apparel Manufacturing
Count
3 min read
Cut
Weight
551 words

Spec notes

  1. Seminar 'Industrial Engineering for Smarter, Leaner and Efficient Apparel Manufacturing' held November 14 at ICCB, Dhaka, during Textile Innovation Expo 2026.
  2. Keynote by Dr. Azim Mohammad, Managing Director, Panacea Private Consulting Group (PPC).
  3. Panel included representatives of IKEA Supply AG's Bangladesh liaison office and Stanley and Stella SA.
  4. Speakers cited bottlenecks, WIP buildup, line imbalances and rework as factors negating capacity expansion.
  5. Recommended tools: lean principles, 5S, digital line monitoring and real-time OEE tracking.
Industrial engineering and lean manufacturing drive apparel floor efficiency
Chip 01 · SW-6037Industrial engineering and lean manufacturing drive apparel floor efficiency — Quanlecntt2004 / pixabay

Garment factories that expand capacity without fixing bottlenecks, work-in-progress buildup and avoidable rework simply erase the gains, industrial engineers warned at a seminar in Dhaka on November 14. The session, titled "Industrial Engineering for Smarter, Leaner and Efficient Apparel Manufacturing," ran at the International Convention City Bashundhara (ICCB) as part of the Textile Innovation Expo 2026.

The audience was technical, not promotional. Industry leaders, industrial and production engineers, consultants and technology experts gathered to discuss reducing waste, optimizing line balancing and improving delivery reliability in readymade garment (RMG) factories — the metrics that buyers now audit alongside price.

What did speakers identify as the cost drivers?

Speakers named the familiar shop-floor losses: bottlenecks, excessive material handling, work-in-progress (WIP) buildup, line imbalances and rework. Each one, they argued, negates the advantage of adding production capacity. Modern apparel manufacturers face simultaneous pressure on efficiency, quality and delivery speed while optimizing manpower, materials and machinery.

The prescribed fixes were concrete rather than conceptual:

  • Lean manufacturing principles and 5S methodologies
  • Effective production planning
  • Digital line monitoring tools
  • Improved line balancing and reduced cycle times
  • Real-time tracking of OEE (Overall Equipment Effectiveness) metrics

Experts framed real-time OEE tracking and tighter cycle times as vital for maintaining competitive margins in global markets. They also stressed that long-term improvement depends on workforce skill development, clear supervision and data-driven decision-making — not tooling alone.

Who spoke, and who were they speaking for?

Dr. Azim Mohammad, Managing Director of Panacea Private Consulting Group (PPC), delivered the keynote presentation and moderated the panel. The panel carried weight on both the vendor and buyer sides of the sourcing equation:

  • Md. Abdulla Al Rumi, Country Manager, Stanley and Stella SA
  • Md. Shadekul Islam, Project Leader, IKEA Supply AG (Bangladesh Liaison Office)
  • Bappy Kumer Roy, Managing Director, Tech Cell BD Ltd.
  • Md. Mahbubur Rahman, Director, BGBA and Chief Inspirational Officer and Founder, R&G 3rd Eye

The presence of IKEA Supply AG and Stanley and Stella SA on the panel signals buyer-side interest in engineering capability, not just price. Panelists shared insights on workflow optimization, digital shop-floor visibility and modern time-study methods.

They argued that bridging the gap between traditional floor practices and advanced industrial engineering solutions helps garment factories achieve sustainable capabilities, lower operational costs and meet stringent buyer compliance requirements. That framing positions industrial engineering as a compliance and cost play simultaneously.

What was agreed versus announced?

The session produced no deals, no volume commitments and no measured results. It was a technical exchange, and readers should weigh it as such. The claims — that lean tools resolve shop-floor inefficiencies, that OEE tracking protects margins — are expert assertions from the podium, not audited outcomes from named factories.

Even so, the composition of the panel matters for sourcing professionals. When a buyer liaison office for IKEA and a country manager for Stanley and Stella join consultants on an industrial engineering panel in Dhaka, it signals where vendor evaluations are heading: toward verified process data, digital visibility and demonstrable line efficiency.

The seminar closed with Engr. Ehsanul Karim Kaiser, Chairman of Textile Innovation Exchange (TIE), handing mementos to the speakers. Expect the efficiency agenda — line balancing, OEE, digital monitoring — to keep moving from seminar rooms into buyer scorecards across the Bangladesh RMG base.

via textiletoday.com.bd (Source)

Filed under

Share this article:

More from Rebecca Stone

Rebecca Stone

Show full bio

Staff writer covering people, launches and day-to-day practice in fashion industry as a trade and business at The Fabric Brief.

308 articles

Also on the board

« Previous articleNext article »